Text only | Text with Images

Theoben Rapid Forum

Airguns => Anything Airgun => Topic started by: Ca_Varminter on August 17, 2021, 05:45:27 PM

Title: So, Do you want to Manufacture "Traditional" Lead Pellets???
Post by: Ca_Varminter on August 17, 2021, 05:45:27 PM
So are you wanting to make and sell you own Traditional style of Pellets??

(https://photos.imageevent.com/scl_electronics/gun/pelletswaging/small/MG_1794_rend.jpg)(https://photos.imageevent.com/scl_electronics/gun/pelletswaging/small/MG_1791_rend.jpg)(https://photos.imageevent.com/scl_electronics/gun/pelletswaging/small/MG_1793_rend.jpg)

So here is the machine you will need....
https://photos.imageevent.com/scl_electronics/gun/pelletswaging/agpm1.mp4

https://photos.imageevent.com/scl_electronics/gun/pelletswaging/agpm2.mp4

The company is on your Side of the Pond!!
https://airgunpelletmachine.com

Stuart
Title: Re: So, Do you want to Manufacture "Traditional" Lead Pellets???
Post by: dannywayoflife on August 17, 2021, 06:53:36 PM
Interesting! I bet they cost a wedge! I've always wanted to try the die sets I've see on YouTube which produce JSB clones using a die set and an arbour press. But never found a website for the company
Title: Re: So, Do you want to Manufacture "Traditional" Lead Pellets???
Post by: Ca_Varminter on August 18, 2021, 02:29:57 AM
I make "Slug" Style of pellets in .22 for my Polygonal barreled Titanium Rapid and other standard Rapids.
(https://photos.imageevent.com/scl_electronics/gun/pelletswaging/websize/swage7.jpg)

If interested..  Here is my full post on the Subject w/ videos..
https://rapidforum.co.uk/forum/index.php?topic=1740.0

Stuart
Title: Re: So, Do you want to Manufacture "Traditional" Lead Pellets???
Post by: Aggy on August 18, 2021, 06:06:41 AM
I am very interested but getting anything out of anywhere in the world into the uk at the moment is a pita
Title: Re: So, Do you want to Manufacture "Traditional" Lead Pellets???
Post by: GB2017 on August 18, 2021, 10:57:04 AM
Try talking to them, if you get a response good on you

I did and got no response
Title: Re: So, Do you want to Manufacture "Traditional" Lead Pellets???
Post by: Ca_Varminter on August 18, 2021, 02:15:15 PM
Quote from: GB2017 on August 18, 2021, 10:57:04 AM
Try talking to them, if you get a response good on you

I did and got no response
Who?

Stuart
Title: Re: So, Do you want to Manufacture "Traditional" Lead Pellets???
Post by: GB2017 on August 18, 2021, 02:21:08 PM
the people @ airgunpelletmachine.com
Title: Re: So, Do you want to Manufacture "Traditional" Lead Pellets???
Post by: Ca_Varminter on August 18, 2021, 02:36:07 PM
OK...
If it was Corbin's....they may not answer immediately...
Well they are dealing with 2nd year of Catastrophic Wildfires!!
Most of western US is under Wildfire warnings!!

Stuart
Title: Re: So, Do you want to Manufacture "Traditional" Lead Pellets???
Post by: GB2017 on August 18, 2021, 03:27:32 PM
No it wasnt Corbin's it was the other lot
Title: Re: So, Do you want to Manufacture "Traditional" Lead Pellets???
Post by: Aggy on August 18, 2021, 05:41:59 PM
Dave Corbin emailed me and answered all questions in great detail ,the kit set are quite expensive especially when adding duty on top
Title: Re: So, Do you want to Manufacture "Traditional" Lead Pellets???
Post by: Ca_Varminter on August 18, 2021, 07:36:40 PM
Dave's Bits he makes are Expensive!!
But considering the workmanship and time involved... it is pretty cheap!!
His company of tool and die guy's are second to None!
All precision parts are hand ground and Diamond Polished!
Needless to say the fit and finish are amazing!!

But it sad to hear the duty on all of it makes it too expensive!!

Stuart
Title: Re: So, Do you want to Manufacture "Traditional" Lead Pellets???
Post by: Aggy on August 18, 2021, 07:49:56 PM
I think the kit came out about £1600 ish and 20% on top of that
Text only | Text with Images