I've seen the bottle clamps but should I be slinging off that given the weight pressure on the bottle thread .Are there other options please
Regards FD .Already has a rear stud .
Quote from: Foxdropper on August 13, 2021, 06:18:42 AM
I've seen the bottle clamps but should I be slinging off that given the weight pressure on the bottle thread .Are there other options please
Regards FD .Already has a rear stud .
Have a look at this video i did regarding the DrBob buddy bottle clamp a year ago maybe Link provided below M8,
Hope this helps you a little,
https://rapidforum.co.uk/forum/index.php?topic=1281.0
The amount of metal in the Bottle, Valve, and Bottle adapter..
Plus having 200 Bar charge of air in it..
This makes for a very Solid platform!
Just make sure your Bottle is Tightly screwed On!
Good Luck,
Stuart
Thanks CV 👍🏻
Not sure but I thought thay used to sling off barrel with a clamp but nowadays with shrouded and different barrels that can't be done
Just drill the wood & fit a captive nut as per any other stock ???
There's plenty of "meat" if you come back under the bottle adaptor.
Unless You have a QF surely the clamp will need to come off to remove the bottle ?
The rapids are floating barrel so not a good idea to use a sling swivel on the barrel.
I use Dr bob buddy bottle clamp.
Regards kev.
Quote from: KCE on January 03, 2022, 04:37:22 PM
The rapids are floating barrel so not a good idea to use a sling swivel on the barrel.
I use Dr buddy bottle clamp.
Regards kev.
Me too!
;)
The reasons I love Dr Bob's Bottle Clamp stud system.....
One, it's a Superior Mounting Setup for a BIPOD... main reason I got a few!!!
Having the bipod Further forward gives you a More Stable platform to shoot from!
Also having the sling stud further forward improves the balance on your shoulder..
(https://photos.imageevent.com/scl_electronics/gun/air/websize/rifle1.jpg)
Stuart
Quote from: Ca_Varminter on January 03, 2022, 05:55:35 PM
Having the bipod Further forward gives you a More Stable platform to shoot from!
Also having the sling stud further forward improves the balance on your shoulder..
Stuart
I used to think that,
but I bought a stock with the stud only about 8" (20cm) in front of the trigger, and discovered it was way more accurate & better balanced with a bipod there than with it further forward.
Each to their own ;).
I hat a mfr witch had 2 factory fitted studs in the stock it was a Cs thumb hole one there's a photo on hear in the 1 that got away.