Hi all, its been a while since i used a Rapid, but now i'm back in the fold i seem to have forgotten almost everything i knew about them. for instance, whats the procedure for removing the buddy bottle? Iirc, 3 turns then dry fire & repeat until off?
Yes unless it's an Mfr Andy you can just unscrew those
Quote from: telbert on August 08, 2021, 09:45:18 AM
Hi all, its been a while since i used a Rapid, but now i'm back in the fold i seem to have forgotten almost everything i knew about them. for instance, whats the procedure for removing the buddy bottle? Iirc, 3 turns then dry fire & repeat until off?
1 1/8 > 1 1/4 turns or you'll be blowing a few o-rings before getting it right.
easiest way to stop the guess work is s to put a bit of tape on the bottle directly under the barrel.
Then when unscrewing do the full turn and line the tape up with the top r/h edge of the stock.
LOL ! I managed to leave my 14 shot AWT magazines at home a while back and whilst having a couple of 7's stacched in the glove box couldn't get my head around loading them.
Quote from: Squinty on August 08, 2021, 12:42:40 PM
Quote from: telbert on August 08, 2021, 09:45:18 AM
Hi all, its been a while since i used a Rapid, but now i'm back in the fold i seem to have forgotten almost everything i knew about them. for instance, whats the procedure for removing the buddy bottle? Iirc, 3 turns then dry fire & repeat until off?
1 1/8 > 1 1/4 turns or you'll be blowing a few o-rings before getting it right.
easiest way to stop the guess work is s to put a bit of tape on the bottle directly under the barrel.
Then when unscrewing do the full turn and line the tape up with the top r/h edge of the stock.
LOL ! I managed to leave my 14 shot AWT magazines at home a while back and whilst having a couple of 7's stacched in the glove box couldn't get my head around loading them.
This seems a bit more cautious than i remember, but i'm all for being cautious ;).
Thanks
Quote from: Squinty on August 08, 2021, 12:42:40 PM
Quote from: telbert on August 08, 2021, 09:45:18 AM
Hi all, its been a while since i used a Rapid, but now i'm back in the fold i seem to have forgotten almost everything i knew about them. for instance, whats the procedure for removing the buddy bottle? Iirc, 3 turns then dry fire & repeat until off?
1 1/8 > 1 1/4 turns or you'll be blowing a few o-rings before getting it right.
easiest way to stop the guess work is s to put a bit of tape on the bottle directly under the barrel.
Then when unscrewing do the full turn and line the tape up with the top r/h edge of the stock.
LOL ! I managed to leave my 14 shot AWT magazines at home a while back and whilst having a couple of 7's stacched in the glove box couldn't get my head around loading them.
#
Shizer!!
I've not even thought about loading a mag. Is it wind anti clockwise and drop in from the back?
Here is a little instruction post with photos on how to load your 12-Shot Mag....
https://rapidforum.co.uk/forum/index.php?topic=256.0
Stuart
Quote from: telbert on August 08, 2021, 02:41:11 PM
This seems a bit more cautious than i remember, but i'm all for being cautious ;).
Thanks
Not so much on the cautious side but its a good guideline, at least you're not going to be searching for the right spot every fill.
Thanks all.
Quote from: telbert on August 08, 2021, 09:45:18 AM
Hi all, its been a while since i used a Rapid, but now i'm back in the fold i seem to have forgotten almost everything i knew about them. for instance, whats the procedure for removing the buddy bottle? Iirc, 3 turns then dry fire & repeat until off?
On my FAC I loosen the bottle 1/2 a turn, then dry fire as I twist,
you can feel the bottle loosen as the internal pressure drops then tighten again as the pressure rebuilds, after a couple of goes the pressure doesn't rebuild at which point just unscrew it all the way.