Text only | Text with Images

Theoben Rapid Forum

Airguns => Anything Airgun => Topic started by: Ozzie9962 on May 24, 2020, 04:53:09 PM

Title: Stock for p10 nearly finished
Post by: Ozzie9962 on May 24, 2020, 04:53:09 PM
What colour sold I stain this
Title: Re: Stock for p10 nearly finished
Post by: KCE on May 24, 2020, 06:04:04 PM
I think that depends on you and the metal work on the gun.
Now is the time to also think are you going to add any stipple of some sort or capping to the pistol grip.
You could also think about adding extra features to the stock.
I would go with a tester to the back of the stock first behind the butt pad when it comes to stain or colour.

Title: Re: Stock for p10 nearly finished
Post by: Ozzie9962 on May 24, 2020, 06:09:31 PM
The gun is black am going to go for a dark colour took some rubbing down got a few hours left to get it bang on am only going to stain it no varnish then Polish it with beeswax
Title: Re: Stock for p10 nearly finished
Post by: KCE on May 24, 2020, 06:18:13 PM
Yes I know what is involved as I have done a fair bit of stock work over the years.
You will also need to make sure you fill the grain before you stain m8 then rub down and wax.
The wax I have always used is Lord Sheratons.
Title: Re: Stock for p10 nearly finished
Post by: Ozzie9962 on May 24, 2020, 07:29:40 PM
Cheers
Title: Re: Stock for p10 nearly finished
Post by: KCE on May 27, 2020, 11:39:02 AM
Here you go Ozzie.
https://www.amazon.co.uk/Lord-Sheraton-Wood-Balsam-75ml/dp/B000TAOS6I
Text only | Text with Images