Managed to get a few bits for a build the other day ....
Late mk1 block with gamo trigger
19" .20 barrel
Carbon mod
Kevg mk1 regulator - mfr type
280cc mfr bottle
Mfr stock
Hawke vantage scope
Think it's turned out quite well 👍
Thats looks sweet Daz . Nicely done.Thumbs up from me :-)
now thats realy nice Daz m8.all goes together well.
KevG
Very nice Daz ,I thought a late mk1 was a scalloped block with mk4 trigger
The late mk1 blocks were standard blocks in the end but had a bottle holder and a reducer screw in prechamber transfer port
It's the same as an early block - same porting as an early mk1 too - its a 2006 mk1 block
The later mk1 blocks had the same porting and pre chamber as a mk2 but with a "choke" grub screw in the reg chamber to valve chamber port
The other points to notice are the sloped front to the block and the mk2 type bolt gate - so it is the mk1 block made between the early mk1 type block and the choked mk2 block type
On these blocks there is a slot in the block for the gamo trigger pin - so the trigger can be removed without using a slave pin as was the case on early mk1 blocks
It looks like a pile of junk, you had better give it to me so that I can dispose if it in the appropriate manner. :)
Seriously though it looks excellent.
Looking good Daz, bet your happy with the build 8)
I am mate cheers 👍
Like the carbon tube over the barrel and the custom carbon 1/2 unf mod
Looking forward to testing it and setting it up
A very nice looking lightweight piece of kit.
Are there more projects in the pipeline Daz.
I just cant bear to neglect my terminator and build another project.
Regards kev.
No more in the pipeline at the minute mate....
But you never know 🤣
Currently....
Mk1 .177 & .20 & .22
Mk1 .22 elan
Mk2 .22 - gsx airtube and stock
Vendetta PP build .22
Might think about a .25 at some point ....
Great looking gun you have there. 👌
Very nice!