Theoben Rapid Forum

DrBob`s products & parts => Dr Bob's Section => Topic started by: Dr Bob on May 23, 2020, 09:34:35 PM

Title: Vendetta build
Post by: Dr Bob on May 23, 2020, 09:34:35 PM
Here's M de Vs block built up almost ready. Just need to tweak the power out put then on to the next.
Bob.
Title: Re: Vendetta build
Post by: Ca_Varminter on May 23, 2020, 10:16:10 PM
That is a Sweet Build Dr Bob!!
So how is the Vendetta and assorted bit doing!

Cheers,
Stuart
Title: Re: Vendetta build
Post by: Kernal on May 23, 2020, 10:22:57 PM
WOW Drbob, WOW is that your work because if it is WOW, I`m very impressed with that block.
Title: Re: Vendetta build
Post by: KCE on May 23, 2020, 10:25:56 PM
Just amazing Dr Bob.
Your idea has come a very long way and here we are today looking at the end product.
I take my hat off to you sir.
Title: Re: Vendetta build
Post by: Kernal on May 23, 2020, 11:58:46 PM
I remember ordering a DrBob reg tester, Fantastic, it's a good piece of equipment for any rapid owner to have, because if your reg goes down and you need to get it back up and running again, you have two choices.....1 throw it in the bin,.....or two buy a DrBobs reg tester and set it up to 80lbs pressure, or 1200 psi.

Mine is running at 1200 psi which is about 80 lbs i think give or take abit, correct me if i`m wrong but i`m sure thats about right.
Title: Re: Vendetta build
Post by: Dr Bob on May 24, 2020, 09:51:40 AM

Can't claim credit the original idea was Chip Smith's I just added the ambidextrous idea. The only thing I  can take credit for is trying to make it available to all at the right price. It is coming along but delays have been a problem. I will get there and the people that have supported me and not criticised me will get the benifits.

Bob
Title: Re: Vendetta build
Post by: Ca_Varminter on May 24, 2020, 04:34:40 PM
HI Dr Bob,
No Criticisms....Just sound Engineering critique!!
But also full Support from this Side of the Pond!!

Atb,
Stuart
Title: Re: Vendetta build
Post by: Scott on June 11, 2020, 01:38:40 PM
That looks very nice Doc

Can I ask why the blocks have that massive V3 on the side?
not a criticism but with it being so in your face it just seems to be detracting from that classy Vendetta script.

Glad to see you haven't gave up on the project I'll probably buy a block myself in time to come.

Title: Re: Vendetta build
Post by: Therapidman on June 18, 2020, 03:53:36 PM
Looking good bob
Title: Re: Vendetta build
Post by: Dr Bob on June 18, 2020, 05:46:52 PM

the "V3" on the side stands for Vendetta Visa Versa (3 Vs) in that it's left and right handed. If I do a run of right handed only I will probably call it a Vendetta CS after Chip Smith.

Bob
Title: Re: Vendetta build
Post by: The Robin on June 18, 2020, 06:32:31 PM
Looks great Bob, do they have a different finish to the block to a standard rapid mk2? Love the top pic  8)
Title: Re: Vendetta build
Post by: Dr Bob on June 18, 2020, 07:35:06 PM
A few had a textured finish totally by accident due to an anodizeing mishap . A bitch to get the internals back to spec. So no more will be attempted.

Bob
Title: Re: Vendetta build
Post by: The Robin on June 18, 2020, 07:51:13 PM
Thanks for the info Bob, that's a shame because it looks great but if it's causing issues I don't blame you for no more.
Title: Re: Vendetta build
Post by: Dr Bob on June 18, 2020, 11:21:02 PM
Not sure what went wrong I suspect they left to soak too long.
Plus it's hard anodizeing on all of them. It's like porcelain. You'll never scratch the exhaust valve chamber getting the valve out though.
Bob
Title: Re: Vendetta build
Post by: The Robin on June 19, 2020, 07:27:42 AM
Again thank Bob and yeah there's an up side with not scratching it. I bet the lucky few who get these blocks are made up with them and how they look  8). I know I would be  :)
Title: Re: Vendetta build
Post by: Dr Bob on June 19, 2020, 09:44:00 AM

On the original PP blocks the engraving was done with a diamond tipped tool by a professional engraver the hard anodizing buggered two of his tips hence the reason it's poor on some of the prototypes.

This batch was engraved by my wife Fran on the laser we use for cutting out the mag covers. Clever ain't she?

Bob
Title: Re: Vendetta build
Post by: Scott on June 19, 2020, 01:26:25 PM
Quote from: Dr Bob on June 18, 2020, 05:46:52 PM

the "V3" on the side stands for Vendetta Visa Versa (3 Vs) in that it's left and right handed. If I do a run of right handed only I will probably call it a Vendetta CS after Chip Smith.

Bob
Ahh the dense fog of stupidity clears and now it makes sense,
I (admittedly) thought it was Version 3 (Yeah I know  :o) but Vendetta Visa Versa is very clever
Thanks for taking the time to explain it Bob

atb Scott
Title: Re: Vendetta build
Post by: Dave74 on June 20, 2020, 02:55:15 PM
Version 3 🤦‍♂️
Title: Re: Vendetta build
Post by: Scott on June 20, 2020, 06:35:47 PM
Quote from: Dave74 on June 20, 2020, 02:55:15 PM
Version 3 🤦‍♂️

Lol C'mon Dave,, I never said I was that bright  :P ;D ;D
Title: Re: Vendetta build
Post by: Lewis86 on October 29, 2020, 09:15:27 PM
Are these available to buy?
Title: Re: Vendetta build
Post by: marky74 on October 30, 2020, 02:40:29 PM
also interested if these are still available
Title: Re: Vendetta build
Post by: Dr Bob on October 30, 2020, 05:00:35 PM

Yes still have some left just sent one over to Guernsey and awaiting feedback.

Bob
Title: Re: Vendetta build
Post by: Mr Bond on February 01, 2021, 07:15:00 PM
Looks terrific Bob. After our chat today i think this is where I'm heading on my next build.

Well done!
Title: Re: Vendetta build
Post by: Mr Bond on February 07, 2021, 09:34:22 AM
Just ordered a Dr Bobs Vendetta block for my black rifle build.

Can't wait to plumb it into the cylinder and have a play!

Love that Velocette font on the logo too
Title: Re: Vendetta build
Post by: Dr Bob on February 07, 2021, 04:20:28 PM
Nearly done. Then on to Mr Bond's  ;)
Title: Re: Vendetta build
Post by: Kernal on February 07, 2021, 06:39:34 PM
Looks great cannot wait to see a picture of the finished job,

:D

Title: Re: Vendetta build
Post by: The Robin on February 07, 2021, 10:37:48 PM
Looking good  8)
Title: Re: Vendetta build
Post by: KevG on February 07, 2021, 11:09:16 PM
Quote from: Dr Bob on February 07, 2021, 04:20:28 PM
Nearly done. Then on to Mr Bond's  ;)
I like that.who did the stock Bob
KevG
Title: Re: Vendetta build
Post by: Dr Bob on February 08, 2021, 11:52:41 AM

It's made by Form Stocks. It's a standard MK2 stock but fitting a MK1 bottle adapter that's 15mm shorter than the MK2 compensates a lot for the fact that the Vendetta block is 19mm longer than the standard Theoben for more pre chamber capacity.

Just a thought for the guys who want to save a few quid if they already have a MK2 stock.

Bob.
Title: Re: Vendetta build
Post by: KCE on February 08, 2021, 11:56:24 AM
Im getting excited to getting one of your blocks Dr Bob for my first project.
Regards kev.
Title: Re: Vendetta build
Post by: Ca_Varminter on February 08, 2021, 04:58:59 PM
Great Build Dr Bob!!!
Too bad it isn't a FAC build......
You could have gone Chips path!!

Chip made a direct bottle to receiver adapter!
Since there is a bottle valve, he install a QF in one of the 2 access ports on the bottom of his Receivers!!
This was his final design..
(https://photos.imageevent.com/scl_electronics/gun/chipsstuff/websize/chips%20direct%20bottle%20adapter.jpg)

Here is one of his early designs... Proof of Concept!
(https://photos.imageevent.com/scl_electronics/gun/ultimaterapid/websize/DSC02092.jpg)

Stuart