Theoben Rapid Forum

Theoben General Chat Area => Theoben Rapid Discussion => Topic started by: Carl. on March 19, 2021, 01:45:43 PM

Title: I just couldn't do it
Post by: Carl. on March 19, 2021, 01:45:43 PM
Ive wanted an Uragan long for a while the Mk2 in .20 is a keeper & i always seem to grab it over the .22 mfr, so i thought id sell the mfr and it would pay towards part of the uragan, all interested parties in the mfr were miles away & didn't really want to drive down too sunny ol kent, "luckily for me" in the end i just couldnt sell her, what if i didnt like the uragan, I'd have let a very good rapid go & what are the chances of finding another in as good condition as this? So the only option ive got is too get a RAW chassis & give her a bit more of a modern look 😁 Order has been placed and paid for just waiting for confirmation email from Leah, then sit back and bite my nails for a couple of weeks until it turns up, then sell the cs too recoup some of the cost, can't wait 😊
Title: Re: I just couldn't do it
Post by: Dr Bob on March 19, 2021, 02:53:18 PM

I ordered mine today ;) I think a Vendetta will look well in one.

Bob
Title: Re: I just couldn't do it
Post by: Carl. on March 19, 2021, 03:51:52 PM
 8)
Bob have you recieved anything from them re postage?
Ive had an email saying that the chassis has been paid for but at the bottom it states that they will contact re shipping costs, and if i log onto the account part on their site it states pending
Cheers Carl
Title: Re: I just couldn't do it
Post by: Tim_B on March 19, 2021, 05:22:06 PM
I don't think you will regret it Carl.

Postage was £76 when I ordered mine, albeit a bigger parcel as it had their furniture and valve in there,.,

Bob - do you need any more pics, or will you just wait until yours turn up now?

Title: Re: I just couldn't do it
Post by: Dr Bob on March 19, 2021, 05:56:46 PM
No just says pending rates unavailable we will contact you.  I'm looking at getting a British version made ;)

Bob
Title: Re: I just couldn't do it
Post by: Carl. on March 19, 2021, 06:07:28 PM
Just had a look to see what time difference is there and it showed that they're closed fri / sat & sun,  hopefully I'll hear something Monday,
Hope so Tim really like what you've done too yours! Personally i think it looks better than the HM1000X
Think im going black hogue stock 😁
Title: Re: I just couldn't do it
Post by: Carl. on March 19, 2021, 06:30:35 PM
Wonder if its possible to get a couple of blanking plates made up that could slide in the cut outs where the quick fill protrudes from "until i can get qf thays if i bother"
Title: Re: I just couldn't do it
Post by: Dr Bob on March 19, 2021, 06:46:03 PM

Ill be looking at all variations when mine comes.
Bob
Title: Re: I just couldn't do it
Post by: KevG on March 19, 2021, 08:12:07 PM
I maybe the odd one out but i don't like the chassis at all.
KevG
Title: Re: I just couldn't do it
Post by: Carl. on March 19, 2021, 08:21:27 PM
Quote from: KevG on March 19, 2021, 08:12:07 PM
I maybe the odd one out but i don't like the chassis at all.
KevG
I think with me Kev it's the cs stock i can't get comfy with it?  It feels a lot heavier and a tad more cumbersome than the oe thumbhole on the mk2 and I've not seen any other stocks that I like, although I do like the thumbhole skeleton
Title: Re: I just couldn't do it
Post by: KCE on March 19, 2021, 08:44:41 PM
Sorry not for me just principle they dropped the uk in the s...many years ago and left us with no parts or after sales and moved to the states.
Over the years we had to adapt to doing parts our self's in the uk they were not interested in us then.
They could have sorted imports out many years ago but decided not to do so.
Now we are here they want to start to import them again I wonder why.
I have nothing against there products but I will stick to my old rapids that have stood the test of time and use the likes of kevG and Dr Bob for my parts.

Regards kev.
Title: Re: I just couldn't do it
Post by: Dr Bob on March 19, 2021, 10:02:21 PM
Quote from: KevG on March 19, 2021, 08:12:07 PM
I maybe the odd one out but i don't like the chassis at all.
KevG
That's the whole beauty of the Rapid.
You can morph it into whatever you want without it being permanent. If you can't get on with the alterations
swap it back.
Title: Re: I just couldn't do it
Post by: maxtich on March 20, 2021, 01:40:43 AM
Quote from: KevG on March 19, 2021, 08:12:07 PM
I maybe the odd one out but i don't like the chassis at all.
KevG


You're Not alone ..i think they are absolutely Fuggly   :)
Title: Re: I just couldn't do it
Post by: Tim_B on March 20, 2021, 07:35:51 AM
Quote from: Carl. on March 19, 2021, 06:30:35 PM
Wonder if its possible to get a couple of blanking plates made up that could slide in the cut outs where the quick fill protrudes from "until i can get qf thays if i bother"
. I don't think blanking plates are a must, it doesn't look that bad to be honest.  Maybe some tape or Delfina tube to cover the silver reg would make it less obvious

A black hogue is a good choice, as is the magpul ctr.  Oh...look what just arrived  8)

Title: Re: I just couldn't do it
Post by: Tim_B on March 20, 2021, 07:37:58 AM
Quote from: Dr Bob on March 19, 2021, 10:02:21 PM
Quote from: KevG on March 19, 2021, 08:12:07 PM.  I maybe the odd one out but i don't like the chassis at all.  KevG.
. That's the whole beauty of the Rapid.   You can morph it into whatever you want without it being permanent. If you can't get on with the alterations swap it back.
That's exactly it Bob - within a few minutes I can have my trusty MFR back looking great in standard form, or a ratting set up with a short barrel in either stock.

Look forward to a UK version of the chassis.  It also allows me to sell my Dreamtac compact so I have one less rifle to think about.  8)
Title: Re: I just couldn't do it
Post by: The Robin on March 20, 2021, 09:25:43 AM
Must admit I do like the look of these and if a UK model comes onto the market I know I will buy it.

I blame Tim for putting this idea in my head with his build which I really like. He's a top guy and showed pics of it with the MFR reg in which is the way I would run it  8)
Title: Re: I just couldn't do it
Post by: Carl. on March 20, 2021, 09:53:38 AM
Quote from: Tim_B on March 20, 2021, 07:35:51 AM
Quote from: Carl. on March 19, 2021, 06:30:35 PM
Wonder if its possible to get a couple of blanking plates made up that could slide in the cut outs where the quick fill protrudes from "until i can get qf thays if i bother"
. I don't think blanking plates are a must, it doesn't look that bad to be honest.  Maybe some tape or Delfina tube to cover the silver reg would make it less obvious

A black hogue is a good choice, as is the magpul ctr.  Oh...look what just arrived  8)
[/quote
How can you be so cruel and take a picture of it in the packaging, Need pictures of it fitted lol
Title: Re: I just couldn't do it
Post by: Carl. on March 20, 2021, 10:33:20 AM
Quote from: The Robin on March 20, 2021, 09:25:43 AM
Must admit I do like the look of these and if a UK model comes onto the market I know I will buy it.

I blame Tim for putting this idea in my head with his build which I really like. He's a top guy and showed pics of it with the MFR reg in which is the way I would run it  8)
Same here Robin lol
Title: Re: I just couldn't do it
Post by: Carl. on March 22, 2021, 05:14:01 PM
@Drbob just got off the phone to RAW in the states and theyve cancelled my order,  all orders now have to go through optics warehouse, they said that they're not shipping individual items anymore as they kept going missing or held up at uk customs Argh!!!!
Title: Re: I just couldn't do it
Post by: Dr Bob on March 22, 2021, 05:18:30 PM

I wondered why the money hadn't gone out of my account >:(

Bob
Title: Re: I just couldn't do it
Post by: Carl. on March 22, 2021, 08:09:25 PM
Arghhhhh! Knew i should have sold the mfr last wk and gone and tried an Uragan
Title: Re: I just couldn't do it
Post by: Aggy on March 22, 2021, 10:31:58 PM
 ;) 8)
Title: Re: I just couldn't do it
Post by: Carl. on March 23, 2021, 10:58:03 AM
Quote from: Aggy on March 22, 2021, 10:31:58 PM
;) 8)
When's your friend coming down to the island again Mick
Title: Re: I just couldn't do it
Post by: Aggy on March 23, 2021, 12:56:24 PM
will ask and get back to you ,or I could meet you, if you are anywhere else other than the absolute bottom of the country miles from anywhere lol ;D
Title: Re: I just couldn't do it
Post by: Carl. on March 23, 2021, 01:01:16 PM
Quote from: Aggy on March 23, 2021, 12:56:24 PM
will ask and get back to you ,or I could meet you, if you are anywhere else other than the absolute bottom of the country miles from anywhere lol ;D
:o always the way  Mick
Title: Re: I just couldn't do it
Post by: Aggy on March 23, 2021, 01:52:59 PM
100 %  still interested letts see if we can work something out re collection 
Title: Re: I just couldn't do it
Post by: Tim_B on March 23, 2021, 01:54:18 PM
Jump in car and drive....easy peasy.   ;D