Text only | Text with Images

Theoben Rapid Forum

Everything Technical About Rapid => Technical => Topic started by: Remchester on February 18, 2021, 08:16:32 PM

Title: Pin hole in Reg pin disk(not the one that should be there)
Post by: Remchester on February 18, 2021, 08:16:32 PM
Any body ever had this problem? Mine has a tiny pin hole in the bottom of the hole for the removal pin holes think its making my reg creep a bit. And is it possible to get a new pin disk or does anyone have one they wil part with?
Rc
Title: Re: Pin hole in Reg pin disk(not the one that should be there)
Post by: KCE on February 18, 2021, 08:33:08 PM
Hi Remchester.

I'm sure one of the guys will help you out on here when they log on with your problem.
Regards Kev.
Title: Re: Pin hole in Reg pin disk(not the one that should be there)
Post by: KevG on February 18, 2021, 09:27:06 PM
it should have a tiny 0.4 mm hole in centre of disc or do you mean on the 2 blind removel holes.is only a very thin thickness of brass in this area.and if not careful a reg tool can  brake through.this would not cause reg to creep it would go to full bottle pressure Instantly
KevG
Text only | Text with Images