After Theoben's apparent rebirth as a USA-based firm, members of the UK airgun industry have contacted Gun Trade News to give their responses.
It appears the move has divided the market: consumers will be hopeful their Theoben rifles will continue to be serviced, but the trade has expressed misgivings at what was once a flagship UK brand having effectively taken its business overseas.
Theoben went into receivership in the UK in October 2012, but as Gun trade news,
(https://www.guntradenews.com/wp-content/uploads/sites/11/2013/02/102_Theoben-Rapid-Mk2web.jpg)
reported last issue, MD Martin Rutterford soon moved to set the Theoben name up in the USA under the banner of Rapid Air Weapons.
A statement given to Gun Trade News by Daystate said: "I find it difficult to palate that a strong, successful British airgun company has been run into the ground by self-interest and management incompetence. It slyly asset-stripped, destroying the company, leading to the laying off of all remaining employees, who have now been paid redundancy at British taxpayers' expense.
"Theoben's creditors, according to a statement by liquidators, are owed tens of thousands of pounds, and we are now told that 'Theoben lives on' and this will result in improvements.
"Production and quality control is now being supervised by Martin Rutterford, who has an unrivalled knowledge of the Rapid version since its launch 20 years ago. This is the same Martin Rutterford who has been MD for the last 10 years and has overseen the demise of this once highly respected company.
"If he can't make a go of the biggest PCP airgun market in the world, how is he going to fare running the shop from a lock-up in Tennessee?"
Production continues in the US, with Rapid Air Weapons recently rolling out its new TM1000 target air rifle. Despite the negative reaction of some sectors of the UK airgun industry, it appears the USA-based outfit will press on unconcerned.
(https://www.guntradenews.com/wp-content/uploads/sites/11/2013/02/theoben.jpg)
Too Little....Too Late.......
Yes he did move Theoben to USA ...
Yes they Did make the Rapid under TheobenUSA....
But that has all changed!!!
Martin Rutherford sold RAW to Airforce....
The Rapid is gone....
Some parts and accessories have been deleted from their website....
But most maintenance replacement part are still there
In Fact, if your call their number, it is forwarded to Airforce headquarters
So I will be making most of my parts...
or email Dr Bob!
Stuart
It`s such a shame the rapid range went this way,....It had so so much "protential"
:'(
I dont know why Chris whistler of impact didn't keep going.surly there was plenty of interest in the product.
KevG
I have tried to contact impact today. They still have a website and facebook page and when you call the phone goes to answer machine. Does anyone know if they are actually still in business.
Well i was told that Theoben had some serious problem`s with there secretary,.... She lost them alot of business,
I could also tell you all that she had a name for herself - frosty knickers,
Why she gained that name i`m sure others will tell!?
I know why but i`m starting to wonder if everyone else know`s why!
?
:)
Are we talking about Frosty knickers here.
Regards kev.
Quote from: KCE on February 04, 2021, 08:16:38 AM
Are we talking about Frosty knickers here.
Regards kev.
Why did she get that name Kev, please do explain :D
I have always known her as that as many others have also told me that over the years, poor attitude towards customers.
When I rang impact in the past and got through to her I was always told by her that there parts are not compatible with Theoben which I found strange.
Regards kev.
Quote from: KevG on February 03, 2021, 10:50:54 PM
I dont know why Chris whistler of impact didn't keep going.surly there was plenty of interest in the product.
KevG
err because he is incompetent / arrogant / couldnt find his own ar5e with his own fingers already shoved up it???
I wanted to buy a block off of him, took me lots of calls to get through as he replies when he can be bothered, when i finally got through and agreed to sell me a block i had to rearrange 3 times (for his convenience) to meet him when i wanted to go and collect it, and despite him having several weeks notice on the morning of collection he still wanted to rearrange again, when i called to express my frustration his first response was to tell me to forget it which really pressed my buttons, i did collect the block but would i give him business in future, Ben and Jerry's are more likely to get a franchise in hell selling ice cream first....
LOL That ben n jerry bit cracked me up.
Regards Kev.
A lot of the problems with Theoben in the UK towards the end were self inflicted ,quality control was shocking at best and the attitude of frosty was astonishing ,when impact started the first show they attended was at Newark shooting show , their display was on a pasting table !!! not a good first impression lol
atvb' Mick
Evening Mick good to see you on here.
Do you remember frosty also.
Regards kev.
Jan I think her name was. I had a few run in's with her. She got a little better when I became an RFD but not much.
Bob
people making after market parts did not help.i dare say theoben made more on keeping the guns going and selling spares than they did the guns.
KevG
Well when I talked to the TheobenUSA/ official importer, Dave Slade and Martin Rutherford..
They both voice the same concerns about the Airgun Community in General...
They both Felt that USA was a bit more friendly towards guns ( we Are the Wild West!!)
But it was the Growing popularity of ADULT Airguns Market in the US that caught their attention!
Of course the lack of any legal limitation of airguns was a Big factor too!!
Stuart
Hi Kev ,in reply to your question , oh YES i do remember frosty .I remember when building up a bare block i rang impact to enquire about spares.Her reply was "Impact parts are far superior to those in Theoben rifles and will NOT work in any way ,when i said the new rifles were in effect a re-badged Rapid she hung up !!!!!.
atvb' Mick
Yes that was frosty lol.
And here we are today still shooting with our best friend in the field the rapid.
Regards kev.
The Rapid platform will be here in some form long after we are gone ,it has stood the test of time and with the lathe boys will continue to improve .
atvb' Mick
I once phoned up to order a Theoben QF/reg,she then proceeded to inform me I need a new stock to fit the QF!
I thought she was going to have a heart attack when I told her I can just drill mine.....
In Italy I had my first theoben 20 years ago, I immediately noticed the abandonment after the purchase. When all the producers already had a site to easily give spare parts, theoben no, they did not reply to e-mails they were very annoyed and if you were lucky, months passed. M.Rutterford partially resolved this but late. Its raws, very beautiful and efficient, should have cost less in order not to crash into more organized corporate management. In Italy, with the fucking laws we have, it's hard to have an airgun without an importer taking over the job.
Very,very,sorry.
I spoke to vinegar tits several times and met her when I went to theoben to buy a few bits from the shop, very rude, arrogant and condescending from memory, wanted a look at a fenman, I got to shoot one in Their loft, batteted old thing the lads that worked there used to plink with in their lunch hour, sights were off on it lol!