Theoben Rapid Forum
DrBob`s products & parts => Dr Bob's Section => Topic started by: Bumpkin on January 25, 2021, 06:16:43 PM
I've been looking at the Vendetta action and it really does look like a great development of the Rapid block. That said, I haven't seen a price for one yet so could I ask how much it please?
Thank you
Contact Dr Bob by pm.
Ok
Cheers
Just finishing one for Geoff on here I'll get some pictures up later. As soon as I have sorted out an odd power curve. It's fast flowed but at 200 bar fill it's 9.5 ftlbs rising to 12.5 ftlbs when it drops to 1250 psi . I'm only using a 10cc res it's the one I use for leak testing. I'm thinking exhaust valve spring tension?
Bob
Unregulated, surely it's the signature of a power curve sweet spot??
Shame you can't get a bigger bottle on it and see if it runs at 12.5 consistently for the flat part of the curve.
This does sound like an unregulated Elan type power delivery thing though, small bottle, same hurdles.
its running like a mk2 block with out a reg Bob.the mk2 will not run at sub 12ftlbs with out a reg.the later mk1 from 2007 had the mk2 block but were choked to death to run with out a reg.bottle adaptor had 0.5mm air flow port plus port from pre to valve chamber was threaded and had a choker screw fited.air just passed through the threads.also valve body front port was 5mm
KevG
In that case Kev can you do me a reg with an MK1 body length? That way the Vendetta block will fit into a standard Theoben MK2 stock. It sticks out just a few MM more than standard, but IMO looks OK.
Here are a few more pics...... creases cleaned up by my wife (photoshop) as I couldn't be bothered ironing the sheet I used as a backdrop. ;D ;D ;D
Bob
For the record it is fast flowed and my exhaust valves have a 5.3mm front port.