Print Page - O rings to sort leak

Title: O rings to sort leak
Post by: Daveyb on January 16, 2021, 11:40:46 PM

So I have a .20 MK1 Rapid with a kevg regulator and a Dr Bob 90° quick fill and black valve fitted.

Am I right in thinking the o rings I need are the following

Bs015 inlet adaptor o ring 2B
015 Blanking screw o ring 6B
011 Valve o ring 6G
4.1x1.6 valve o ring 6K
607 valve stem o ring 6L.

I have fully stripped and polished the rifle and fitted Kev's reg and Dr Bob's quick fill before so not a novice, just been that long since I have stripped the rifle

Title: Re: O rings to sort leak
Post by: KevG on January 17, 2021, 12:02:49 AM

thats spot on dave m8
KevG

Title: Re: O rings to sort leak
Post by: Daveyb on January 17, 2021, 01:31:56 AM

Thanks kev, just didn't know if any needed for your reg mate will call you probably tomorrow about seals and also about the The Double Tap Inertia Weight as well

Theoben Rapid Forum

Everything Technical About Rapid => Technical => Topic started by: Daveyb on January 16, 2021, 11:40:46 PM