Best fittings are now producing MFR buddy bottle valves in two thread sizes.
https://www.bestfittings.co.uk/shop/fill-probes-adaptors/buddy-bottles-valves/best-fittings-buddy-bottle-valves-theoben-mfr-valve-fitment/ (https://www.bestfittings.co.uk/shop/fill-probes-adaptors/buddy-bottles-valves/best-fittings-buddy-bottle-valves-theoben-mfr-valve-fitment/)
yes rhys on here was testing one last week and says it was bang on.good price to.good heads up.
KevG
Thanks for the heads up just ordered mine 👍
just orderd 2.will let you all know how i get on with them
KevG
Great news, I will order one and see how it goes. Also nice having both sizes available too
Yep mine is going strong.
My friends mfr needed some serious help to bring it back to life including a new bottle top.
So far it's been faultless.
well got my 2 valves yesterday.removed the extra oring as not needed and made it very tight on butting upto a reg even with no bottle on valve.also could not push the valve open at all as the valve spring screw was butt up tight.so removed brass threaded part so I could adjust the screw so valve could open.didnt bother re fitting brass screw.then fitted on bottle.seams to work well and very well made.i don't know why the have gone so long with the valve to bottle threads as they are much longer than the actual bottle threads.
KevG
Good stuff Kev, so a little tweak was needed on yours so it engaged when fitted.
I'm still awaiting mine. Out of interest why has the best fittings got an extra o ring unlike my MFR valved bottles I have?
yes it works fine now.what you have to watch for is the valve thread is longer than the bottle internal thread.so you are screwing into virgin threads in the bottle also some of the last bottle threads can be a bit rough.so its worth screwing in and out a couple of times and making sure no debris of threads have entered the bottle.
KevG
no idea why they have fitted the extra oring.
KevG
Thanks Kev with the info I will watch out for how it feels on the threads when I fit it to my bottle and follow your tip on it ;)
They have fitted the extra o ring as if the main stem o ring fails the second o ring will help to keep it sealed.
You can then change the stem o ring when you next take the bottle off.
Sam from BF gave me this info on email
Nice one Rhys, thanks for the info. So it's a back up type o ring :)
Some pics of the MFR valve.
Quote from: rgc_swanseaARC on January 22, 2021, 06:24:37 PM
They have fitted the extra o ring as if the main stem o ring fails the second o ring will help to keep it sealed.
You can then change the stem o ring when you next take the bottle off.
Sam from BF gave me this info on email
thing is though if its later type mfr reg it would still leak if the reg to bottle oring failed.as it would leak through the push pin disc locking grub screw hole.
KevG
Yes probably, but I suppose it was a good thought even if the applicationay not be exact.
I've left it on, but taking it off won't do any harm either.
I'm just pleased we actually now have an option when the factory pips fail
with out a doubt.i think these will be top sellers especially as they cater for the 400cc to.
KevG