Hi Gents,
Just a little update for you.
Some of you may have seen I have been helping to fix a pretty abused Theoben mfr for a friend who bought it in good faith but didn't realise the issues it had.
Anyway, as part of that process the 280cc bottle top is well and truly had it.
Cannot stop the leak no matter what I tried.
After a few emails with best fittings I was sent one of their as yet unreleased new mfr tops.
These are available in both thread patterns so not only can they be used for standard bottles but also for a carbon bottle swap (clearance dependant)
In short, subject to a few days on pressure to check for leaks it's works brilliantly and is very well made.
Cleverly, they have also incorporated an improvement.
The mfr seals on the regulator nozzle with a small o ring.
This is prone to wear and tear but easily replaceable.
As a guard against leaks from this area Best have milled the new top to the counterbore that is on the bottle inlet adapter and fitted a second external o ring, a la BSA or a non mfr regged Theoben....nifty.
I did have concerns that this would stop the push pin from being able to contact the bottle pip and thus starting the airflow, but it seems they have done their homework as this was not an issue.
Anyone looking for an MFR style bottle top, keep an eye on their website, apparently they are coming soon.
Regards
Rhys
nice info there rhys m8
KevG
Early days Kev but looks a good quality alternative for the mfr
only thing is the extra bottle oring will not stop the reg leaking if the internal reg to bottle oring goes if on a later type reg as it would leak through the locking grub screw hole.but tha doesn't realy mater as main thing some one is making mfr bottle valves which is a bonus.wish you would send me that old troublesom bottle valve.would love another go at it m8.
KevG
Good to hear the MFR bottle tops are nearly ready. Been in contact with Best fittings for nearly a year about them. They said they had machine issues last time i spoke to them. Will keep an eye on their website now. 👌
Great news Rhys, I bet there are plenty of folk needing a MFR bottle valve (I know I am) 8)
So far so good.
Its gone the weekend without any major disasters so i think it may be ok.
The acid test is when i unscrew the bottle later on, will it dump all the air or will it behave?
I am a bit confused.... :-\ :-\ :-\ :-\ :-\ :-\
I thought all the Stock MFR bottle valves had a groove on the neck for a O-ring already??
At least they used to ?
Stuart
(https://photos.imageevent.com/scl_electronics/gun/air/large/bottle%20valves.jpg)
yes some do and some dont Stuart m8.
KevG
Thanks KevG!!
Always wait for the Guy with the Rabid Fox to set the Record Straight!!
Happy New Years too
Stuart