Print Page - Regulator on a Mark 1

Title: Regulator on a Mark 1
Post by: Gudge on December 23, 2020, 12:24:02 AM

Is a regulator recommended for a Mark 1 Rapid, and if so can they be short enough not to push the bottle forward when replacing the existing part? I have an old one from Theoben from and FAC Mark 2 and it is quite a bit longer. Any general advice on whether to add one and where from is welcome.
Thanks Gudge

Title: Re: Regulator on a Mark 1
Post by: dyker2010 on December 23, 2020, 01:36:58 AM

an ordinary reg wont work in an early mk1 kevg makes them shorter work a treat

Title: Re: Regulator on a Mark 1
Post by: Kernal on December 23, 2020, 08:37:08 AM

I have a KevG reg on my Mrk 1 and trust me when i say this, Once you have one of his reg`s fitted to your mrk 1 you`ll never look back.

Its the best thing i`ve ever bought for my Mrk 1 & very very reliable.

Title: Re: Regulator on a Mark 1
Post by: Gudge on December 23, 2020, 09:49:49 AM

Thanks for the advice Kernal, i will follow up with KevG. Cheers. Andy

Title: Re: Regulator on a Mark 1
Post by: kennyboy on December 23, 2020, 10:10:36 AM

I had a KevG reg fitted recently. Can`t recommend them enough. Shot count almost doubled. Well worth the money. ATB Ken.

Title: Re: Regulator on a Mark 1
Post by: KevG on December 23, 2020, 09:03:58 PM

Quote from: Gudge on December 23, 2020, 09:49:49 AM
Thanks for the advice Kernal, i will follow up with KevG. Cheers. Andy

Good to talk to you today m8.
KevG

Title: Re: Regulator on a Mark 1
Post by: Gudge on December 24, 2020, 04:43:07 PM

Thanks Kev, looking forward to the regulator, thanks for the advice you gave me.

Theoben Rapid Forum

Everything Technical About Rapid => Technical => Topic started by: Gudge on December 23, 2020, 12:24:02 AM