Theoben Rapid Forum

Theoben General Chat Area => Theoben Rapid Discussion => Topic started by: Billyboy on December 03, 2020, 07:49:19 PM

Title: Kev silencer
Post by: Billyboy on December 03, 2020, 07:49:19 PM
Kev are your silencers the same size for 16" and 19" barrels
Title: Re: Kev silencer
Post by: Kernal on December 03, 2020, 07:55:42 PM
I have a KevG silencer fitted to my 19 inch barrel and its MINT! Love it!

:D
Title: Re: Kev silencer
Post by: KCE on December 03, 2020, 08:33:23 PM
kev can make them to your spec.

Im the only one lol to have one of these.
Regards kev.
Title: Re: Kev silencer
Post by: Kernal on December 03, 2020, 08:36:27 PM
Let KevG turn it down Kev lol,  ;D ;D ;D ;D ;D  ,  and while he`s turning it down i`ll hold the other end while its turning in the lathe cos it`s that long.

;)
Title: Re: Kev silencer
Post by: Billyboy on December 03, 2020, 09:31:31 PM
So would one made for a 19" barrel fit a 16"
Title: Re: Kev silencer
Post by: KCE on December 03, 2020, 09:41:11 PM
you can have reflex/ screw on/ or slip on/ to suit your needs.
Regards kev.
ps it depends on dia of barrel if they will inter change.
Title: Re: Kev silencer
Post by: hunter on January 08, 2021, 11:35:11 PM
Hi guys I'm after Kev g to make me a silencer been can style ( meaning flat both ends ) around 8" maybe 10 " inch long  around 40 mm 42 mm diameter push on in mat carbon or gloss if he can't get mat
Hopefully he'll see this if he doesn't can any one direct me thanks
Title: Re: Kev silencer
Post by: hunter on January 08, 2021, 11:37:21 PM
It's for my rapid mk2
Title: Re: Kev silencer
Post by: KevG on January 09, 2021, 12:39:12 AM
I've got stuff in to do 36mm.and in matt.thats the size I normally have in.
kevG
Title: Re: Kev silencer
Post by: hunter on January 09, 2021, 07:24:22 AM
Cheers Kev I'll have a measure up and have a think
Thanks for the quick response
Title: Re: Kev silencer
Post by: Daveyb on January 19, 2021, 10:22:46 PM
Quote from: Kernal on December 03, 2020, 08:36:27 PM
Let KevG turn it down Kev lol,  ;D ;D ;D ;D ;D  ,  and while he`s turning it down i`ll hold the other end while its turning in the lathe cos it`s that long.

;)

He needs it that long because he is crap shot so hits them instead ha ha
Title: Re: Kev silencer
Post by: Wisa on February 16, 2021, 05:50:40 PM
Hi Guys,
I've a couple of Kev's moderators.  One on a threaded .22 Mk1 and one grub screwed on my 12/200. I swear by them.
Title: Re: Kev silencer
Post by: Therapidman on March 09, 2021, 07:16:45 PM
I have kevg silencers fitted to all 7 of my rapids and there just brilliant  . And a brilliant service from kev every time
Title: Re: Kev silencer
Post by: Kernal on March 10, 2021, 12:29:17 AM
Quote from: Wisa on February 16, 2021, 05:50:40 PM
Hi Guys,
I've a couple of Kev's moderators.  One on a threaded .22 Mk1 and one grub screwed on my 12/200. I swear by them.



Lmao well thats fake news because Kev- KCE, " told me he call`s it the Terminator",  and with the amount of things i`ve seen him post when shooting the Terminator,...well i can only say it stands up to his words.

:D
Title: Re: Kev silencer
Post by: Wisa on April 07, 2021, 09:19:12 PM
I've so many silencers from the Weihrauch to a twink 2 Daystate's including the 0DB, a Hugget 2 different Theoben Mods but none can compete with Kev's moderators.  I've 2 both carbon.  One screw on one grub. I can't recommend high enough.  They are amazing.