Theoben Rapid Forum
Everything Technical About Rapid => Technical => Topic started by: Remchester on November 25, 2020, 11:31:15 AM
As above can I put the reg kev made for my mk1 on a mk2? They look very similar but dont know if they are compatible? As the one on the mk2 is knackered at the min
yes you can but you will need to adjust reg pressure.
KevG
what up with mk2 reg.
KevG
Quote from: KevG on November 25, 2020, 04:42:20 PM
what up with mk2 reg.
KevG
Even if calibre is same? The mk2 reg has rounded out on the adjuster so needs a new core or shortening down to make it a short core like yours are kev mate👍
easy way is to just shorten and re thread.
no mk1 as a higher reg pressure setting..chances are it would drop power on the mk2 as it would be over pressured.
KevG
Quote from: KevG on November 25, 2020, 04:56:04 PM
easy way is to just shorten and re thread.
no mk1 as a higher reg pressure setting..chances are it would drop power on the mk2 as it would be over pressured.
KevG
Ya learne something new every day! Thanks kev I would have been scratching my head if I'd swapped it over👍🤣🤣 looks like I'll have to find a good reg tester then any recommendations? And I'll have bring the broke one over to get sorted at some point no rush