Theoben Rapid Forum

DrBob`s products & parts => Dr Bob's Section => Topic started by: Kernal on November 24, 2020, 08:51:29 PM

Title: Attention of DrBob - Weaver rail
Post by: Kernal on November 24, 2020, 08:51:29 PM
Hi

I was wondering if you could help me out as i`ve lost one of the screws that hold the DrBob rail onto my Rapid block as per photo attached below.
How much would it cost for you to post our a new single screw for my weaver rail please.

:)
Title: Re: Attention of DrBob - Weaver rail
Post by: Ca_Varminter on November 25, 2020, 07:30:38 AM
Your Rapid....as a deposit
:o :o 8) :o :o
Stuart
Title: Re: Attention of DrBob - Weaver rail
Post by: Dr Bob on November 25, 2020, 12:51:12 PM

£1.50 gift Pay pal to [email protected] and I'll post you a couple out. You still got the proper 3/32 hex key? If not you'll strip them.

Bob
Title: Re: Attention of DrBob - Weaver rail
Post by: Kernal on November 25, 2020, 01:27:22 PM
Cheers for the fast reply DrBob,  but I've found the missing screw.

;)
Title: Re: Attention of DrBob - Weaver rail
Post by: Dr Bob on January 26, 2021, 11:35:16 AM

The big problem with the rail screws is people using 2mm hex keys and stripping them. They are an oddball 3/32 imperial that's slightly bigger than 2mm. I do supply this with the rail, but it's easily mixed up in your tool box with all the others that you get for free. SO! In order to help you identify it.
I have stated to put a band of yellow shrink sleeving around it.

Bob