Theoben Rapid Forum

Theoben General Chat Area => Theoben Rapid Discussion => Topic started by: Kernal on November 17, 2020, 08:05:15 PM

Title: Powder coating my barrel
Post by: Kernal on November 17, 2020, 08:05:15 PM
I`ve been thinking about having my barrel powder coated, any idea`s anyone if this is even possible to have done?

If so whats the best method to do this or would it be possible to have this done professionally.

:)
Title: Re: Powder coating my barrel
Post by: Ca_Varminter on November 17, 2020, 11:48:14 PM
Baked on Cerakote is the way to Go!
Way more Durable, and solvent resistant..

Stuart
Title: Re: Powder coating my barrel
Post by: Kernal on November 18, 2020, 09:24:40 AM
Quote from: Ca_Varminter on November 17, 2020, 11:48:14 PM
Baked on Cerakote is the way to Go!
Way more Durable, and solvent resistant..

Stuart

Where do i get this done any idea`s, and what do you think it would look like on my rapid barrel, also does anyone do this or has thought of doing this to rid yourself of the bluing on your barrel.

:)
Title: Re: Powder coating my barrel
Post by: Daztilley on November 18, 2020, 10:08:55 AM
Cheap / easy / renewable ....

Gorilla grip camo tape 👍
Title: Re: Powder coating my barrel
Post by: Dr Bob on November 18, 2020, 10:42:28 AM

Yes I've had one powder coated. I put it in with a batch of bottle clamps. Good result just make sure the crown, rifling and part that fits into the block are masked of first as it's quite thick stuff.

Bob
Title: Re: Powder coating my barrel
Post by: Kernal on November 18, 2020, 06:45:18 PM
Quote from: Dr Bob on November 18, 2020, 10:42:28 AM

Yes I've had one powder coated. I put it in with a batch of bottle clamps. Good result just make sure the crown, rifling and part that fits into the block are masked of first as it's quite thick stuff.

Bob

Any pointers as to where to send my barrel too,...So i can get this job done! , also how much to mask off so they don`t powder coat the piece that goes into the block or silencer.

:)
Title: Re: Powder coating my barrel
Post by: Ca_Varminter on November 18, 2020, 07:55:51 PM
Quote from: Kernal on November 18, 2020, 09:24:40 AM

Where do i get this done any idea`s, and what do you think it would look like on my rapid barrel, also does anyone do this or has thought of doing this to rid yourself of the bluing on your barrel.

:)

Usually any metal finishing Fabrication should have offer service...
Google "Cerakote Service"
Also gun refinishing service...
Also take a look on Youtube.. for description and durability examples!!


Stuart
Title: Re: Powder coating my barrel
Post by: dyker2010 on November 18, 2020, 10:47:18 PM
or get it polished and hot blued from shaun at isp air rifles£50 last time i got it done first class job and service hth
Title: Re: Powder coating my barrel
Post by: anthony on November 19, 2020, 04:20:25 PM
https://www.highcalibrecoatings.co.uk/

https://www.techcoat.co.uk/
Title: Re: Powder coating my barrel
Post by: Kernal on November 19, 2020, 05:58:56 PM
Well thanks guy`s now i have quite a few options to choose from, But as for bluing well there is nothing wrong with the bluing on the barrel already so i think thats a no no,
But powder coating or Cerakote is probably the road i may choose as i`m in two minds if i want to fit the carbon tube as yet! , but that is now an option as well but until i make up my mind regarding the carbon tube i`ll just leave it in the box for now.

;)
Title: Re: Powder coating my barrel
Post by: Ca_Varminter on November 19, 2020, 06:16:46 PM
OMG!!!
You are worried about your barrel you are covering with a Carbon fiber tube!!!!
Jeez, just wipe down REAL good with Oil or Grease!!

But a better solution, I use on my Precision Machinist tools.. Hard Wax!!!
No Rust Anywhere!!!!
Just give your barrel Several coats, wipe it down between coats..
Cover and Forget it!!

BTW this what I do for all my Shrouded Barrels!!!!!!!!
Even the unfinished LW polygonal barrel on my Titanium Rapid!!!

Stuart
Title: Re: Powder coating my barrel
Post by: Kernal on November 19, 2020, 07:27:02 PM
Well if i was honest Stuart,

I don`t think there is enough coverage between the barrel & bottle when the Carbon fiber tube is fitted,...But that was a tomorrow job as i`m going to take some photo`s and show everyone just how much clearance i get when i have my bottle and DrBob clamp on the gun,

I may have to lose the buddy bottle camo cover i had on the bottle years as that could give me a mill or two maybe,...Anyway lets see what tomorrow bring when i take clear photos to show everyone just how much space i have to play with.

:)

Title: Re: Powder coating my barrel
Post by: Ca_Varminter on November 19, 2020, 07:56:21 PM
The clearance should be that close!!
Dr Bob and I research his design.. so it would fit my Shrouded Barrel without touching the Shroud!
(https://photos.imageevent.com/scl_electronics/gun/air/websize/rifle3.jpg)

Here is the clearance you should have...
This is a stock photo from Dr Bob's V-style QF.....
(https://photos.imageevent.com/scl_electronics/gun/air/websize/Dr%20Bob%20V%20QF.jpg)

Stuart
Title: Re: Powder coating my barrel
Post by: Kernal on November 19, 2020, 08:03:37 PM
I have the regulator fitted to my rapid by KevG and i`m sure when i looked at the clearance today when i was out shooting with my rapid  the bottle was really close to the barrel which in my opinion could create a problem.

I think what i need to do is take photo`s to show you just how much clearance i have before i think about fitting the carbon tube.

:)
Title: Re: Powder coating my barrel
Post by: Kernal on November 19, 2020, 08:10:03 PM
Quote from: Kernal on November 19, 2020, 08:03:37 PM
I have the regulator fitted to my rapid by KevG and i`m sure when i looked at the clearance today when i was out shooting with my rapid  the bottle was really close to the barrel which in my opinion could create a problem.

I think what i need to do is take photo`s to show you just how much clearance i have before i think about fitting the carbon tube.

:)

Ok i`ll take these photos now so lets get the popcorn out and get ready for the next post to show you clearance between my buddy bottle and the barrel.

:)
Title: Re: Powder coating my barrel
Post by: Kernal on November 19, 2020, 08:20:31 PM
Okay here we have it, pictures attached.
;)
Title: Re: Powder coating my barrel
Post by: Kernal on November 19, 2020, 09:51:26 PM
So tomorrow i`ll fit the carbon tube to my barrel , So is it to be wax to protect my barrel or oil when i fit the carbon tube.

After its fitted i`ll take photo`s to show the gun with the Carbon tube fitted and also the DrBob buddy bottle clamp fitted to see how it looks and the clearance we have but i do think i`m going to have to lose my buddy bottle camo cover though!

:)
Title: Re: Powder coating my barrel
Post by: dyker2010 on November 19, 2020, 11:25:04 PM
if the bluing is ok why powder coat it etc ,, i thought it was bare steel or damaged bluing i covered a lw bare steel one with carbon tube made delrin ends  on tube not much delrin left to go in tube to center it, waxed barrel slide it on still a gap between  barrel and bottle. barrel is still ok for corrosion .plugged and glued carbon tube with delrin then bored and finished on lathe
Title: Re: Powder coating my barrel
Post by: Kernal on November 19, 2020, 11:32:00 PM
Quote from: dyker2010 on November 19, 2020, 11:25:04 PM
if the bluing is ok why powder coat it etc ,, i thought it was bare steel or damaged bluing i covered a lw bare steel one with carbon tube made delrin ends  on tube not much delrin left to go in tube to center it, waxed barrel slide it on still a gap between  barrel and bottle. barrel is still ok for corrosion .plugged and glued carbon tube with delrin then bored and finished on lathe

All i wanted is to make it more durable in wet weather, or damp conditions,...So i don`t need to keep worring about cleaning the barrel or leaving it over long periods wondering if it`s started to rust.

So i was thinking of powder coating my barrel so its got more protection against wet weather or in bad conditions or damp conditions.

:)
Title: Re: Powder coating my barrel
Post by: dyker2010 on November 20, 2020, 07:33:21 AM
 I see, well the carbon tube idea does work and if you ever come to sell it still got a standard blued barrel underneath.some have put an oring either end of the tube to seal it
Title: Re: Powder coating my barrel
Post by: Kernal on November 20, 2020, 12:39:23 PM
Here's a picture showing the carbon tube fitted.

Also here's photos of the buddy bottle clamp fitted to complete the job.

;)
Title: Re: Powder coating my barrel
Post by: Kernal on November 20, 2020, 02:03:28 PM
Everything fits just great  8)