Theoben Rapid Forum
Theoben General Chat Area => Theoben Rapid Discussion => Topic started by: Mattlz on October 31, 2020, 03:04:21 PM
Hi guys I have a 2004/05 mk2 ser no. 020935 fitted with the mk3 trigger. Trigger is crisp enough but would upgrading to one of Bob's mk4 units be worthwhile? I've heard that the mk3 is a good unit in its own right and pretty similar. Thoughts please.
The Mark 4 is a great trigger and upgrade to your Rapid!!
It is a simple drop-in conversion... the only other part you will need is a Hammer for the Mark 4 trigger.
Dr bob has both!!
Good Luck,
Stuart
The MK4 + trigger I produce is to Chip Smiths drawings. The sears are angled very and I do mean very slightly to a different angle . This difference may be minute but given the mechanical multiplication of the levers it does make a small difference over the std MK4 trigger.
Bob