Theoben Rapid Forum

Theoben General Chat Area => Theoben Rapid Discussion => Topic started by: Daztilley on October 26, 2020, 05:19:09 PM

Title: Early block - new build
Post by: Daztilley on October 26, 2020, 05:19:09 PM
Managed to get a nice early mk1 block..

Marked up as .22 and I have a carbon shrouded 12" .22 barrel on its way....

Thinking of fitting it into an mfr stock and using 280cc and 200cc buddy bottles

Looking forward to a new build as I havent done one for a while.......

Block serial no is 000476 which indicates it was made in August 1992

More info and pics to follow ....
Title: Re: Early block - new build
Post by: KevG on October 26, 2020, 06:28:21 PM
carnt beat an old original rapid block.just something about them
KevG
Title: Re: Early block - new build
Post by: Daztilley on October 26, 2020, 06:34:00 PM
Yep looking forward to it kev - not had an early mk1 for a while - just fancy the simplicity of an unregulated rapid 👍
Title: Re: Early block - new build
Post by: Daztilley on October 27, 2020, 01:19:38 PM
Have got 2 SSG setups with different hammer springs to test in the build.... will make it more efficient and give a greater shot count from the 280cc and 200cc bottles 👍
Title: Re: Early block - new build
Post by: Kernal on October 27, 2020, 01:45:38 PM
Oh i must have missed this post Daztilley,

Is this some kind of upgrade for the spring & guide inside the Rapid,....Looks nicely put together.

:)
Title: Re: Early block - new build
Post by: Daztilley on October 27, 2020, 01:49:55 PM
Yes mate the SSG ( spring stop guide ) eliminates hammer bounce and does increase the shot count available 👍

Title: Re: Early block - new build
Post by: Kernal on October 27, 2020, 01:52:50 PM
Quote from: Daztilley on October 27, 2020, 01:49:55 PM
Yes mate the SSG ( spring stop guide ) eliminates hammer bounce and does increase the shot count available 👍

Could be a daft question but who make`s these and do you have a link pointing to whoever makes them,...It look`s a really nice setup!



Title: Re: Early block - new build
Post by: Daztilley on October 27, 2020, 02:03:28 PM
They were made by Martin444 - he sent me 3 to test and yeps they are really well made and fit the hammer very well 👍 the one that isn't in the pic lives in my tubed rapid setup
Title: Re: Early block - new build
Post by: Kernal on October 27, 2020, 02:06:51 PM
Maybe KevG or DrBob could copy the idea,...It does look a very nice setup.

:)
Title: Re: Early block - new build
Post by: Daztilley on October 27, 2020, 05:05:22 PM
Kev makes his double tap inertia setup which eliminates hammer bounce - they both work in different ways but achieve the same result 👍
Title: Re: Early block - new build
Post by: Kernal on October 27, 2020, 05:08:06 PM
KevG is always feeding me his biscuits instead of feeding me the real upgrade`s LMAO

Oh well!

I do like his biscuits tho!

;)
Title: Re: Early block - new build
Post by: Daztilley on October 28, 2020, 04:54:16 PM
A couple more pics of the stamped sections of the block....
Title: Re: Early block - new build
Post by: Daztilley on October 28, 2020, 07:02:07 PM
Shrouded barrel fitted and setup with 200cc buddy bottle
Title: Re: Early block - new build
Post by: Lewis86 on October 28, 2020, 10:22:01 PM
Quote from: Daztilley on October 28, 2020, 07:02:07 PM
Shrouded barrel fitted and setup with 200cc buddy bottle

What would the shot count be in a build like this using a 200cc bottle? Be a nice little compact rig. Have you thought what stock you will use?
Title: Re: Early block - new build
Post by: Daztilley on October 29, 2020, 04:14:35 AM
There's a few things that will affect the shot count....

12" .22 barrel
SSG fitted
200cc bottle @ 180bar
Looking to set it at 11 ft/lb

So shot count in the "sweet spot" would just be a best guess until I set it up and test it

I've got an MFR stock spare .... but with the mk1 block fitted theres not enough clearance to screw the bottle on fully - so thinking of getting a mk1 stock.
Title: Re: Early block - new build
Post by: Lewis86 on October 29, 2020, 07:05:59 AM
Quote from: Daztilley on October 29, 2020, 04:14:35 AM
There's a few things that will affect the shot count....

12" .22 barrel
SSG fitted
200cc bottle @ 180bar
Looking to set it at 11 ft/lb


I'd imagine it will be enough shots for a days shooting. It will be a nice little thing once it's all together.

So shot count in the "sweet spot" would just be a best guess until I set it up and test it

I've got an MFR stock spare .... but with the mk1 block fitted theres not enough clearance to screw the bottle on fully - so thinking of getting a mk1 stock.
Title: Re: Early block - new build
Post by: Remchester on October 29, 2020, 02:29:59 PM
Quote from: Daztilley on October 28, 2020, 07:02:07 PM
Shrouded barrel fitted and setup with 200cc buddy bottle
Heres my 97/8 block I built up with a 280cc bottle no regulator 13 inch btas hft400 barrel in .22 silent hammer pip and the shroud I made my self out of bits off the bay and some carbon tube not super quiet but not loud either it's only hair curlers and felt in it nowt fancy kevg serviced it not long ago off the top of my head I get around 100+ shots from 180 down to 100 ish? Starts off at 10.90fpe upto about 11.6 ish through the curve cant remember the consistency off the top of my head but it's good for a un reged gun
Title: Re: Early block - new build
Post by: Squinty on October 29, 2020, 06:11:36 PM
Quote from: Daztilley on October 29, 2020, 04:14:35 AM
There's a few things that will affect the shot count....

12" .22 barrel
SSG fitted
200cc bottle @ 180bar
Looking to set it at 11 ft/lb

So shot count in the "sweet spot" would just be a best guess until I set it up and test it

I've got an MFR stock spare .... but with the mk1 block fitted theres not enough clearance to screw the bottle on fully - so thinking of getting a mk1 stock.

You could use a later mk1/2 fastflow which would give clearance for the bottle, air will bypass the threads but you could machine a waist and put a small hole in to improve airflow.
On the other hand there will be a gap at the back of the stock....
Title: Re: Early block - new build
Post by: Daztilley on October 29, 2020, 07:52:08 PM
Did think about getting a later bottle adaptor and having it machined but...... a lad on the other forum had a spare mk1 stock that needs work and sent it to me to use 👍

Its missing the butt pad and the paint job could do with tidying up - it fits the block and bottle perfectly 👍 just thinking it might be a great project on its own 😎
Title: Re: Early block - new build
Post by: Daztilley on November 01, 2020, 08:29:01 AM
1st time out with the mk1
1 rook
2 ferals

Not bad so far - gun is shooting really nice
Really quiet with the shroud too 👍
Title: Re: Early block - new build
Post by: Budder on November 01, 2020, 11:33:49 AM
Looks an awesome little set up you have there! Loving the stumpy barrel. 😍
Title: Re: Early block - new build
Post by: Daztilley on November 01, 2020, 06:09:12 PM
Thanks mate - yep its just a 12" barrel under the carbon shroud - really handy and pointable 👍
Title: Re: Early block - new build
Post by: Daztilley on November 02, 2020, 12:24:07 PM
Will be using the "proper" mags in it too 👍
Title: Re: Early block - new build
Post by: Daztilley on November 03, 2020, 12:21:27 PM
Shot string results
200cc @ 180bar

Might need to turn it up  bit to 11.3
Title: Re: Early block - new build
Post by: Daztilley on November 03, 2020, 01:34:53 PM
Tweaked it slightly ...
Title: Re: Early block - new build
Post by: Daztilley on November 03, 2020, 03:26:02 PM
And a bit more .....

Great numbers for an unregulated rapid 👍
Title: Re: Early block - new build
Post by: KevG on November 03, 2020, 03:37:54 PM
nothing wrong with that daz m8.nice work.
The old mk1s are very consistent shot to shot when set up right.
KevG
Title: Re: Early block - new build
Post by: Daztilley on November 03, 2020, 03:45:12 PM
Cheers Kev 👍
Yep took a little bit of tweaking but im very happy with the ES and SD  after turning it up slightly...

Not bad really with the 12" barrel and 200cc bottle
Title: Re: Early block - new build
Post by: Remchester on November 03, 2020, 08:25:11 PM
Tidy numbers daz mate! I need to get some pellets in and do some chronoing I'm almost out but there seems to be a bit of a drowt at the min!
Title: Re: Early block - new build
Post by: Daztilley on November 03, 2020, 08:38:51 PM
I need some more too after today mate - must have used 1/2 a tin of AA field

Cheap enough off e bay though 👍
Title: Re: Early block - new build
Post by: Daztilley on November 06, 2020, 07:08:53 PM
Fitted the bisley butt pad 👍

Thats the build finished - very happy how its turned out - will be my go to farm gun i think 🤔
Title: Re: Early block - new build
Post by: Billyboy on November 09, 2020, 06:16:09 PM
Like it mate ...Great consistency on that Daz 👍
Title: Re: Early block - new build
Post by: Kernal on November 09, 2020, 06:19:46 PM
Been thinking of fitting one of them to my stock, but decided to order a new stock from Custom Stocks, so that idea flew out the window,...but it looks really nice that does Daztilley,...nice job m8.

8)
Title: Re: Early block - new build
Post by: Daztilley on November 09, 2020, 06:30:42 PM
Cheers guys 👍
Its turned out to be better than I thought - the chrono results are great too - did a 90 shot string and the numbers opened up slightly but still not bad over 90 shots from the 200cc bottle at 180bar

The 90 shot string was done before I turned it up to 11.35 ft/lb using AA field @ 16 grain
Title: Re: Early block - new build
Post by: Daztilley on November 09, 2020, 08:28:34 PM
Will have to do another shot string now its set at 11.35 ft / lb - to see how many shots I get before it starts to drop out of the sweet spot....