Theoben Rapid Forum

Theoben General Chat Area => Theoben Rapid Discussion => Topic started by: smithy123 on October 24, 2020, 01:51:51 PM

Title: Carbon wrap
Post by: smithy123 on October 24, 2020, 01:51:51 PM
What does everyone think about this then!!! I've carbon fibre wrapped my buddy bottle and my moderator ......My carbon sleeve should be here Monday for my barrel however I'm unsure whether it's going to sit flush with the mod that's my only concern, other than that I think I've done a decent job myself quite chuffed with 😁😁😁
Title: Re: Carbon wrap
Post by: Topsparx1 on October 24, 2020, 02:04:00 PM
TBH I'm not a fan of the carbon fibre look but you have done a great job of fitting it. Once the sleeve is on as well I'm sure it will look great 👍🏻
Title: Re: Carbon wrap
Post by: smithy123 on October 24, 2020, 02:42:29 PM
Quote from: Topsparx1 on October 24, 2020, 02:04:00 PM
TBH I'm not a fan of the carbon fibre look but you have done a great job of fitting it. Once the sleeve is on as well I'm sure it will look great 👍🏻


Cheers mate.... I think the carbon sleeve will make it a hole lot better when it's done 😄






Title: Re: Carbon wrap
Post by: Lewis86 on October 24, 2020, 10:01:23 PM
Looks smart that does pal. Wrapping can be a nightmare to do sometimes. What size carbon tube did you buy? 18mm OD 16mm ID?
Title: Re: Carbon wrap
Post by: smithy123 on October 25, 2020, 08:45:23 AM
Quote from: Lewis86 on October 24, 2020, 10:01:23 PM
Looks smart that does pal. Wrapping can be a nightmare to do sometimes. What size carbon tube did you buy? 18mm OD 16mm ID?

Yes mate that's the one I've ordered... that is right isn't it, and how do I fit it? Do I just cut it to length and slide it on??
Title: Re: Carbon wrap
Post by: Budder on October 25, 2020, 10:47:41 AM
Thats all i did with my carbon tube, just cut it a little too long then cut it back bit by bit. The only thing i did was put a o ring on against the block, just a bit of a buffer. 👍
Title: Re: Carbon wrap
Post by: Budder on October 25, 2020, 10:54:47 AM
This is the o ring.
Title: Re: Carbon wrap
Post by: smithy123 on October 25, 2020, 11:47:06 AM
Cheers mate didn't think of doing that but it would help keep the carbon tube in place more Aswell ... good idea that budder cheers !!!👍😁
Title: Re: Carbon wrap
Post by: Brooksy on October 25, 2020, 03:48:06 PM
Very neat job on the wrap and trimming. With the sleeve, fit it as above, but give the barrel a good oiling first to prevent corrosion. I'd use Ballistol or petroleum jelly.
Title: Re: Carbon wrap
Post by: Kernal on October 25, 2020, 04:06:34 PM
Quote from: Brooksy on October 25, 2020, 03:48:06 PM
Very neat job on the wrap and trimming. With the sleeve, fit it as above, but give the barrel a good oiling first to prevent corrosion. I'd use Ballistol or petroleum jelly.

Good advice Brooksy,....Take heed of what Brookly say`s

:)
Title: Re: Carbon wrap
Post by: Brooksy on October 25, 2020, 06:33:45 PM
Quote from: Kernal on October 25, 2020, 04:06:34 PM
Quote from: Brooksy on October 25, 2020, 03:48:06 PM
Very neat job on the wrap and trimming. With the sleeve, fit it as above, but give the barrel a good oiling first to prevent corrosion. I'd use Ballistol or petroleum jelly.

Good advice Brooksy,....Take heed of what Brookly say`s

:)
I tried to avoid the word "Vaseline" in my thoughts of slipping a tube in!   :-*
Title: Re: Carbon wrap
Post by: Kernal on October 25, 2020, 06:35:41 PM
Nice lol....   ;D ;D ;D ;D ;D
Title: Re: Carbon wrap
Post by: KCE on October 25, 2020, 06:59:17 PM
A very nice and neat job smithy123.

Will look even better once you get the carbon tube.

Regards kev.
Title: Re: Carbon wrap
Post by: smithy123 on October 25, 2020, 07:47:03 PM
Quote from: KCE on October 25, 2020, 06:59:17 PM
A very nice and neat job smithy123.

Will look even better once you get the carbon tube.

Regards kev.


Thanks Kev mate.... I'm hoping it all looks good once done!!! I'll keep you posted when it comes👍👍 put a couple pics on

Can't wait till it's finally done I won't want to take it out hunting🤪🤪
Title: Re: Carbon wrap
Post by: Ca_Varminter on October 25, 2020, 08:04:58 PM
Quote from: Brooksy on October 25, 2020, 03:48:06 PM
Very neat job on the wrap and trimming. With the sleeve, fit it as above, but give the barrel a good oiling first to prevent corrosion. I'd use Ballistol or petroleum jelly.

Another good metal protection.....
Some good preservative wax!
A couple of good coats should do it!!

Stuart
Title: Re: Carbon wrap
Post by: smithy123 on October 25, 2020, 08:13:29 PM
Thanks Stuart will take that in mind
Title: Re: Carbon wrap
Post by: Lewis86 on October 25, 2020, 08:20:28 PM
Quote from: Brooksy on October 25, 2020, 03:48:06 PM
Very neat job on the wrap and trimming. With the sleeve, fit it as above, but give the barrel a good oiling first to prevent corrosion. I'd use Ballistol or petroleum jelly.

I'd never even thought of that. I'm going to be putting one on my barrel this week. Cheers