Theoben Rapid Forum

Theoben General Chat Area => Theoben Rapid Discussion => Topic started by: Kernal on October 20, 2020, 04:17:36 PM

Title: Airgun Accuracy Custom Internal work Done By KevG, Weaver Rail by DRBOB
Post by: Kernal on October 20, 2020, 04:17:36 PM
Video footage of the Rapid mrk 1 tuned by KevG and of what it can do after being tuned by him,.....also stand alone photos of the weaver rail fitted to the mrk 1 supplied by DRBOB to fit the ATN scope,..this you can also see in the photos included and the weaver rail fits just great,


The link below is the rapid mrk1 tuned by KevG

https://www.youtube.com/watch?v=5_cmy0q589I


This video shows you just how the mrk1 produced its shot by shot count as we shot the target as you can see below using a five pence piece,

https://www.youtube.com/watch?v=ECMwG_wTkJQ

We also included photo shoots of DRBOBS weaver rail  that that is compatible with the ATN scope without any problems this was fitted to the Rapid Mrk1,

Title: Re: Airgun Accuracy Custom Internal work Done By KevG, Weaver Rail by DRBOB
Post by: Lewis86 on October 20, 2020, 04:26:30 PM
Brilliant. What Range was it at? How are you finding the ATN scope? My friend swears by his
Title: Re: Airgun Accuracy Custom Internal work Done By KevG, Weaver Rail by DRBOB
Post by: Kernal on October 20, 2020, 04:32:27 PM
More pictures of the weaver rail conversion by DRBOB,.... below showing you just how good it fits into the mrk1 block using the ATN scope.

:)

Great work DRBOB works a treat!



Title: Re: Airgun Accuracy Custom Internal work Done By KevG, Weaver Rail by DRBOB
Post by: Ca_Varminter on October 20, 2020, 05:42:55 PM
Hi Kernal,

Did i see a pencil poking that first hole dead center in the Bullseye??
JUST KIDDING!!!!!!
:P :P :P :P :P :P :P :P

Great shooting is your MK I @ 12 fpe? At what distance were you shooting from??
Very Nice!
What can you say... KevG and Dr Bob parts and technical knowledge!!

Stuart
Title: Re: Airgun Accuracy Custom Internal work Done By KevG, Weaver Rail by DRBOB
Post by: Kernal on October 20, 2020, 05:50:21 PM
What can you say Stuart,...DrBob`s weaver rail conversion kit fits brilliant for the ATN scope without a glitch,

And as for KevG tuning well second to none,...but soon i`ll be trying my rapid with the full tuning kit by KevG to see just how that does,

So this thread is to be continued....

:)
Title: Re: Airgun Accuracy Custom Internal work Done By KevG, Weaver Rail by DRBOB
Post by: smithy123 on October 20, 2020, 05:53:28 PM
It was me who was shooting 😁😁 and was only 25m just a quick tester of the scope see how it works and I found it pretty good. Can't wait to get out to do a spot of shooting at night with it. And cheers Stuart for that 😁😁
Will be going out into the field to set at 40m so will update you on how I went on with it
Title: Re: Airgun Accuracy Custom Internal work Done By KevG, Weaver Rail by DRBOB
Post by: Budder on October 20, 2020, 05:56:22 PM
Great shooting, cant beat a Mk1. Need to get my trio looked at by the legend that is Kev G!
Title: Re: Airgun Accuracy Custom Internal work Done By KevG, Weaver Rail by DRBOB
Post by: Budder on October 20, 2020, 05:58:43 PM
Shot at this piece of card side on the other day @25 metres with my Mk1 in. 22. Not bad for a 23 year gun and a useless git behind it!
Title: Re: Airgun Accuracy Custom Internal work Done By KevG, Weaver Rail by DRBOB
Post by: Ca_Varminter on October 20, 2020, 06:07:37 PM
Quote from: smithy123 on October 20, 2020, 05:53:28 PM
It was me who was shooting 😁😁 and was only 25m just a quick tester of the scope see how it works and I found it pretty good. Can't wait to get out to do a spot of shooting at night with it. And cheers Stuart for that 😁😁
Will be going out into the field to set at 40m so will update you on how I went on with it

I stand Corrected... Great Shooting smithy123!!!!
At least I know it wasn't Kernal's MK I shooting those targets!!
I look forward to hear about how it does out in the field!!
Good luck, and Good Shooting!

Stuart
Title: Re: Airgun Accuracy Custom Internal work Done By KevG, Weaver Rail by DRBOB
Post by: Kernal on October 20, 2020, 06:18:38 PM
Quote from: Ca_Varminter on October 20, 2020, 06:07:37 PM
Quote from: smithy123 on October 20, 2020, 05:53:28 PM
It was me who was shooting 😁😁 and was only 25m just a quick tester of the scope see how it works and I found it pretty good. Can't wait to get out to do a spot of shooting at night with it. And cheers Stuart for that 😁😁
Will be going out into the field to set at 40m so will update you on how I went on with it

I stand Corrected... Great Shooting smithy123!!!!
At least I know it wasn't Kernal's MK I shooting those targets!!
I look forward to hear about how it does out in the field!!
Good luck, and Good Shooting!

Stuart

LOL,...Hey my Rapid may have spiders on it but KevG has only just give it a full service,...Looking like a gem my Rapid now Stuart,...your just jealous.

:P :P :P :P :P :P :P :P :P :P :P
Title: Re: Airgun Accuracy Custom Internal work Done By KevG, Weaver Rail by DRBOB
Post by: Ca_Varminter on October 21, 2020, 05:12:33 AM
I bet those spider are more Rabid looking than KevG's Fox!!!
::) ::) ::) ::) ::) ::) ::) ::) ::) ::) ::) ::) ::)


Stuart